Description
This is what we consider our standard system. Our 4-stage standard system is exactly like the beginner system except for water pressure and TDS monitoring. It can tell you when your pressure is correct or not and what your TDS is for incoming and outgoing water. This data can help you better understand if your system is running properly and when filter changes might be needed. We also build in a manual flush valve which allows you to flush your membrane for longer life and better operation.
Details
- TFC 100 GPD RO Membrane
- Installed Pressure Gauge
- Premium Sediment Filter
- Carbon Block Filter
- Mixed Bed Color Indicating Zero TDS DI resin
- Heavy Duty Aluminum Mounting Bracket
- Quick Connect Fittings standard (no compression)
- Built in the USA by Aqua FX
Parts Included with Every system
- 1/4" Hose Bib Adapter (Unless another supply type is chosen)
- TFC RO Membrane
- 10" Canister Filter Wrench
- 6 feet of supply tube, drain tube and product tube
- Instruction Manual
RO DI Pro Tips
- Never use HOT water in your RO system. Your membrane cannot handle water over 80 degrees and will not filter it properly. It can also damage the membrane.
- The GPD (Gallons Per Day) rating is the amount of clean water your system will produce over a 24-hour continuous run time.
- Most customers change out sediment when it is visibly dirty, carbon once a year, the membrane when TDS creeps up or DI Resin runs out fast (usually 12-24 months), DI Resin when the color changes or TDS creeps up.
Our RO Systems
System 1 – Beginner
This is your basic 4 stage 100 GPD RODI System. This is for budget minded consumers who just want something that works without the bells and whistles. It will filter your source water, but it will not be able to tell you much information about TDS or water pressure. Those can be measured using other tools. You can add booster pumps or TDS meters as needed based on your current setup.
System 2 – Standard
This is what we consider our standard system. Our 4-stage standard system is exactly like the beginner system except for water pressure and TDS monitoring. It can tell you when your pressure is correct or not and what your TDS is for incoming and outgoing water. This data can help you better understand if your system is running properly and when filter changes might be needed. We also build in a manual flush valve which allows you to flush your membrane for longer life and better operation.
System 3 – Pro
We consider this our pro RODI system. It is also a 4 stage 100 GPD System but in this case, there is a built-in microcontroller that will automatically manage the flushing of the membrane, so you do not have to manually do anything. It also includes a booster pump to boost your source water to the perfect pressure.
Upgrades
Waste Water Reducing 100 GPD Upgrade Kit
Our Water Reducing Upgrade Kit is the perfect way to increase the efficiency and production of your system. The kit basically adds a second membrane to your system. If you are operating at the proper pressure this can double your RODI’s output while reducing your wastewater by 50%. You will supply your new RO Membrane with the wastewater from the previous RO membrane, so you have 2 RO membranes producing product water, but only one RO membrane creating wastewater. Because you lose roughly 10 psi across any RO membrane element, you MUST HAVE at least 55 psi at the feed of the first RO membrane. If your system is 200 GPD, you can still add a third RO membrane to achieve 300 GPD as long as you have enough water pressure is good.
Kit Includes: 100 GPD Membrane, a Membrane Housing, 2 Mounting Clips, 3 Quick Connect Tees, matching flow restrictor, and additional tubing.
Add on DI Kit
This kit is everything you need to add an additional stage of DI Resin. This is done to add additional filtration and to extend the operating time you have before changing resins.
Kit Includes: single stage canister, two quick connectors, color changing di resin cartridge, mounting bracket and additional tubing.
Add on Double DI Kit
This kit is everything you need to add 2 additional stages of DI Resin. This is done to add additional filtration and to extend the operating time you have before changing resins.
Kit Includes: single stage canister, two quick connectors, two color changing di resin cartridge, mounting bracket and additional tubing.
Add on Sediment Prefilter
Some customers with very dirty water like to add extra sediment filters and a prefilter. This kit includes everything you need to add a sediment prefilter. It includes a filter designed to run as the first stage of filtration to remove heavy sediments. When running multiple sediment stages it is recommend to run the higher micron size filter first.
Kit Includes: single stage canister, two quick connectors, sediment filter, mounting bracket and additional tubing.
Chloramine Destroyer Upgrade Kit
In areas where there are chloramines, we have created this kit to help you filter those out. This kit will allow you to move your sediment stage to a prefilter and replace your current sediment and carbon block with Chloramine removing filters. You need 2 stages to remove chloramine because ammonia is difficult to remove.
Kit Includes: single stage canister, two quick connectors, 2 chloramine removing carbon blocks, mounting bracket and additional tubing.
