Apex Controller

Kit Includes 1x FMM Module, 2x Solid Surface Leak Detection Probe. Aquarium leaks are one of the most feared events for even the most seasoned aquarist – and for good reason. When it comes to leaks, it’s not just about whether you’ll...

COR 15 - This submersible pump (that can also be run externally) now has its own external control box but still only requires you connect it up one place - 1Link. With less than 50w of power it is pushing 1500gph and more importantly at 6' of head...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It...

The Fluid Monitoring Kit Includes: 1x - FMM Fluid Monitoring Module 1x - 1" Flow Sensor (FS-100) 2x - 1/2" Flow Sensor (FS-50) 2x - 1" Unions 4x - 1/2" Adapters FMK What's In The Box? The FMM (Fluid Monitoring Module) is a multi-purpose...

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from...

Key New Features in our A3 Series: The A3 Apex will include a new Magnetic Optical Sensor that is designed to better prevent water incursion and includes our classic Solid Surface Leak Detector (LD-2). The most successful aquariums are those...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

Skimmer Security Made Simple Smart Skimmer Security by AutoAqua uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflows. No moving parts to service or fail. Magnetically coupled sensor makes it super...

This attractive fluid containment system stores your dosing fluids in style and even tells you when it’s time to refill! Each side stores two liters (2L) of fluid Connects directly to your DŌS Optical sensors inform your APEX when...

1LINK™ – Easy, one-click installation The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for...

Key New Features in our A3 Series: The A3 Pro will include all new, industry-first, Liquid Level Sensor (LLS) which will have the ability to measure and monitor the depth of water and a new optical multi-surface leak detection probe that works on any...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Moonlight LEDs for your aquarium emulate that...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

The Trident Sample Line Tubing from Neptune Systems is a replacement part for maintaining the operation of your Trident system. This tubing is designed to replace worn, dirty, or damaged sample lines, helping ensure accurate water testing.

Peace at Mind Made Simple Featuring a Plug and Play design, Smart Level Security automatically detects the water level status when mounted. Magnetically-coupled sensor makes it easy to adjust to the desired level to secure your aquarium...

Do to the nature of the chemicals used in the reagents, all orders that include Trident NP reagents must ship ground only.   Trident NP Nitrate & Phosphate Tester w/ 2 Month Reagent Kit Reagents Store Neatly Inside the Trident Test...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. Don’t have carpet, see the next...

The A3 Jr is a Monitoring Only solution.  You can not turn anything on or off with it straight out of the box.  It becomes a full controller however as soon as you add a Powerbar.  To make it a full controller just buy an Energy Bar...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

Adaptive Reef in conjunction with Harry's Aquatics is pleased to bring a full line of products designed to work with and enhance the user experience with aquarium controllers. From switch control boxes and 0-10v based devices to warning lights and...

Trident NP Nitrate & Phosphate Tester WITHOUT REAGENTS Reagents Store Neatly Inside the Trident Test Nitrate and Phosphate Automatically Once Per Day Compatible with A3 Apex (Apex Pro, Apex, Apex Jr.) or A2 Apex (Apex, Apex EL) Designed and...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

This Package Includes: 1x - Full Apex A3 PRO WIFI Controller System 1x - Apex TRIDENT - Automatic Water Tester w/2 Month Reagents & Calibration Fluids 1x - Neptune DOS QD Dosing Pump The New Apex System includes probes for Temperature, pH,...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

Smart AC Socket is a simple accessory from AutoAqua that allows the use to swap out the small DC pump on a Smart ATO, Smart ATO Micro or AWC to any AC pump under 9amps power draw.

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses British Standard Parallel Pipe...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

Designed with hobbyist needs in mind, Red Sea’s new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place. The Control Panel is designed to...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

The Trident Waste Line Tubing from Neptune Systems is a replacement part for maintaining the operation of your Trident system. This tubing is designed to replace worn, dirty, or damaged waste lines, helping ensure accurate water testing.

Mount your Vortech Pump Controller in style.

This Package Includes: 1x - Full Apex A3 PRO WIFI Controller System 1x - Apex TRIDENT - Automatic Water Tester w/2 Month Reagents & Calibration Fluids The New Apex System includes probes for Temperature, pH, and ORP. The pH and ORP probes are...

The 23″ sensor is a bit larger version of the 15″ sensor and can be utilized in similar applications to the 15″ but for larger sized-aquariums.   A great application to consider is utilizing these advancing a roller mat...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

Designed with hobbyist needs in mind, Red Sea’s new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place. The Control Panel is designed to...