Control

Trident Reagent Kit 6 Month Supply - With six month kits, the cost of running the Trident is less than $17 per month - that’s averages out to about 7 cents a test! Neptune Systems recommends keeping on hand no more Trident reagent than you might...

PLEASE ONLY PURCHASE 1x Two Month Supply.  We will not be able to restock any reagents for the next 30 days. 2-month reagent kit (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day).  The reagent kit has at least 240...

The Crossover Diet from Neptune Systems is a new type of food that was designed specifically for coral reef tanks and specifically for automatic feeding systems. Working closely with Reed Mariculture (the manufacturer of Reef Nutrition foods) we came up...

Replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings. Buy this probe if you are: Replacing an old probe. Adding another tank to your system via a PM1. Want to have more...

Neptune Systems Magnetic Probe Rack Features – MPR: Organizes up to four probes. Designed specifically for the Apex Controller probes, a perfect fit for the thicker temp probes. Built with an all acrylic weather and shatter resistant design...

A multi-purpose dosing and fluid delivery system of uncompromising quality combined with the simplicity of Apex Fusion software wizards for operations such as: 2-part dosing (Calcium and Alkalinity) Other additives dosing Automatic water...

Feed your fish consistently, and safely, while you are home OR away! NOT A STAND-ALONE FEEDER (MUST BE USED WITH AN APEX SYSTEM) A key component of caring for aquatic animals is regularly providing them with food, but in amounts that get consumed...

DŌS Replacement Pump Head Cap for your Neptune Systems DŌS module.  Complete assembly includes cover, peri-tube, fittings and roller wheel. Neptune Systems recommends that these be replaced approximately every 700 hours of pump run time.

The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium — and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with...

Do to the nature of the chemicals used in the reagents, all orders that include Trident NP reagents must ship ground only.   Replacement Reagent Kit for Trident NP (2 Month Supply) Keep your Trident NP Nitrate and Phosphate Tester...

Terminates the Hydros Collective

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a power supply brick or the AquaBus cable. Just one wire!...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater uses NEW IN VERSION 2: Automatic shut off when...

This Energy Bar 832 was redesigned from the ground up.  Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports...

This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in...

The Magnetic Optical Sensor replaces our optical sensor with magnet and offers an improved look, feel, and magnetic design that also lends itself to help prevent water incursion into the sensor. This sensor plugs into your FMM and, using reflected...

With huge features jammed in a tiny package, the Duetto2 is the perfect ATO for your aquarium. XPAqua’s proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation. The new aquarium hobbyist has many challenges, but none is more annoying than the chore of adding water, every day, to make up for...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Pre-wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquariums, now with WIFI control. ITC-306T WIFI is a pre-wired heating output temperature controller with time function specifically for aquariums. It can be...

This 6 foott long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

* Requires a HYDROS Controller to Operate.  Will not operate standalone. The HYDROS Power 4 WiFi Power Strip is a smart power bar designed to work with the CoralVue HYDROS platform.  The Power 4 has 4 x 120V AC outlets and 4 x USB ports...

This 1 foot long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Start measuring salinity in your tank and get alerts when out of range. Buy this probe if you are: Replacing an old probe. Adding salinity monitoring to your system via a PM2.

This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar...

Requires a Hydros to Control the Unit The HYDROS Dosing Pump is a simple and affordable way to automate the addition of liquid supplements, trace elements, and two-part solutions to an aquarium. Connect the Dosing Pump to any available HYDROS Control...

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second...

FMM – FLUID MONITORING MODULE IT DOES SO MUCH! This is just the module itself without and sensors. The FMM (Fluid Monitoring Module) is a module that connects to any Apex (Apex(2016), Apex Classic, Apex Lite, Apex Jr.) via it’s AquaBus...

COR 20 - This pump is identical in physical size to the COR 15 but with the addition of an External power supply can push over 2000gph! All that flow for less than 100w of power and it is nearly silent. After deciding to do this larger, higher flow...

Requires a HYDROS System to operate The HYDROS Water Level Sensor is an optical sensor you can use for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. It...

The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, or whatever else you may come up...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses BSPP threads so for North...

With the Fauna Marin Multi-Reference Solution, you can test your test kits under accurate conditions. Our Reference Solution is the first to be based on a saltwater matrix and is quality tested using our ICP-AES testing machine. We use a saltwater matrix...

Requires a HYDROS System to operate The HYDROS Automatic WiFi Fish Feeder is suitable for a variety of fish foods. A HYDROS Control is required to operate. The Fish Feeder is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile...

New to the leak detector offerings is the Optical Multi Surface Leak Sensor (LD-3).  This is a weighted sensor that is an improved sensor and design over our Solid-Surface Leak Sensor (LD-2).  Those improvements include: An epoxied design...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Why purchase a separate and expensive auto top-off system when HYDROS can do the job for you? The HYDROS Auto Top-Off Kit comes with everything you need to use your HYDROS device (like the Control X2 or Control X4) as...