Control

Direct Pump Driver - For IceCap Gyre WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Please note: CONTROL XP8 ONLY - Nothing else is included. Achieve Ultimate Security with the HYDROS Control XP8 Power Strip The HYDROS Control XP8 is an eight 120V AC outlet energy bar and can control eight HYDROS WiFi devices with individual power...

Requires a HYDROS System to operate The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. The way it works is easy: just place the sensor inside...

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It...

The Red Sea ReefCan is an Auto Top Off reservoir designed to either fit in the cabinet alongside a sump or failing that, at the side of the cabinet on the outside. It will come in two sizes, a 40 liter/10.6-gallon volume, and an 18 liter/4.8 gallon,...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Tube Holder - Sea Side Aquatics

This 9ft long extension cable for HYDROS Drive Accessories for Control 2 and Control 4.

Skimmer Security Made Simple Smart Skimmer Security by AutoAqua uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflows. No moving parts to service or fail. Magnetically coupled sensor makes it super...

308-WIFI： [WIFI & APP] WIFI smart controller supports both IOS & Android WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.  [Dual Relay Output] Dual relay...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

This attractive fluid containment system stores your dosing fluids in style and even tells you when it’s time to refill! Each side stores two liters (2L) of fluid Connects directly to your DŌS Optical sensors inform your APEX when...

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Moonlight LEDs for your aquarium emulate that...

This 9ft long extension cable for HYDROS Sense Accessories for Control 2 and Control 4.

A concentrated reagent specifically for the Alkatronic Alkalinity Controller. For every 1 part reagent, mix 4 parts RO/DI water. Every 1000mL of concentrate will produce 5000mL Total of solution. Store locked up Keep away from children. Not for human...

This Heating Element Required a Heating Controller to Operate! - https://www.saltwateraquarium.com/hc-810m-digital-temperature-controller-up-to-800-watts-finnex/ The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

Direct Pump Driver - For Maxspect Gyre 330/350 WE Pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from...

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle® High...

The Reef Breeders Prism-ATO  is designed to work with aquariums of all sizes, from pico desktops and All-in-One aquariums with limited space, to large reef tanks with full sumps. The Prism ATO has 3 sensors and registers your water level in a...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. Don’t have carpet, see the next...

Lab Grade Salinity/Conductivity Probe Kit Keep track of the salinity in your marine aquarium with the CoralVue HYDROS Salinity Kit. This kit includes the necessary 28ppt and 35ppt calibration solutions to ensure precise conductivity...

This is a replacement vial for Mastertronic. It includes one (1) silicon cap.  DOES NOT include stirring magnet.

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Say “Au Revoir” to your old reservoir. The Hydrofill Ti Reservoir is the next generation auto top off gadget that simplifies tasks involved for evaporated makeup water. The smart design offers 15 gallons of storage capacity and a mere (12...

The HC-0810M Finnex controller offers a precision digital control with LED digital display which maintains water temperatures at a constant level protecting your livestock from temperature fluctuations.  Easily adjustable high/low temperature...

3 Water Level Sensors for Added Redundancy Requires a HYDROS System to operate The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

Key New Features in our A3 Series: The A3 Pro will include all new, industry-first, Liquid Level Sensor (LLS) which will have the ability to measure and monitor the depth of water and a new optical multi-surface leak detection probe that works on any...

Not your standard Aquarium heater.  The Finnex Digital touch Control HMX series sports a sleek modernized black control face that is easily controlled via it's precision touch pad.  Corrosion-r3esistant, fast heater titanium tube is engulfed in...

Peace at Mind Made Simple Featuring a Plug and Play design, Smart Level Security automatically detects the water level status when mounted. Magnetically-coupled sensor makes it easy to adjust to the desired level to secure your aquarium...

Direct Pump Driver - For Reef Octopus Varios / Pulse WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

1LINK™ – Easy, one-click installation The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

Key New Features in our A3 Series: The A3 Apex will include a new Magnetic Optical Sensor that is designed to better prevent water incursion and includes our classic Solid Surface Leak Detector (LD-2). The most successful aquariums are those...

The all new Cobalt Aquatics NEO-Therm fully submersible electronic heaters feature a modern, super flat design with an easy to set “one touch” control system. The advanced electronic thermostat is accurate to ±0.5ºF and includes a...