Control

With the Fauna Marin Multi-Reference Solution, you can test your test kits under accurate conditions. Our Reference Solution is the first to be based on a saltwater matrix and is quality tested using our ICP-AES testing machine. We use a saltwater matrix...

Requires a HYDROS System to operate The HYDROS Temperature Sensor is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe...

The ReefATO+ sensor requires the electrical conductivity levels that are typical for seawater to work properly and therefore this system will not work for freshwater systems. The ReefATO+ is an exceptionally reliable auto top-off system that includes a...

Inkbird Dual Temperature Controller with Dual Aquarium Probes & WIFI control.  WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature...

Please note: CONTROL XP8 ONLY - Nothing else is included. Achieve Ultimate Security with the HYDROS Control XP8 Power Strip The HYDROS Control XP8 is an eight 120V AC outlet energy bar and can control eight HYDROS WiFi devices with individual power...

DŌS QuietDrive - Dose. Automate. Protect. New QuietZone Modes for Reduced Noise New Continuous Duty Modes Same Reliable DŌS Hardware Compatible with A2 and A3 Series Apex Controllers In the most important ways, this is still the same Neptune...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses BSPP threads so for North...

The Red Sea ReefCan is an Auto Top Off reservoir designed to either fit in the cabinet alongside a sump or failing that, at the side of the cabinet on the outside. It will come in two sizes, a 40 liter/10.6-gallon volume, and an 18 liter/4.8 gallon,...

This HYDROS Drive Port Cable (72 inches long) is designed to connect to an available Drive port on a Kraken, X2, X4, XD, or other HYDROS Control directly to power small 12V devices such as ATO pumps, cabinet LED lights, fans, solenoids, and steering...

The Red Sea ReefCan is an Auto Top Off reservoir designed to either fit in the cabinet alongside a sump or failing that, at the side of the cabinet on the outside. It will come in two sizes, a 40 liter/10.6-gallon volume, and an 18 liter/4.8 gallon,...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

This Heating Element Required a Heating Controller to Operate! - https://www.saltwateraquarium.com/hc-810m-digital-temperature-controller-up-to-800-watts-finnex/ The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from...

Requires a HYDROS System to operate Protect your aquarium, home, or office from total disaster The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Kit Includes: Leak...

Direct Pump Driver - For IceCap Gyre WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle® High...

Lab Grade Salinity/Conductivity Probe Kit Keep track of the salinity in your marine aquarium with the CoralVue HYDROS Salinity Kit. This kit includes the necessary 28ppt and 35ppt calibration solutions to ensure precise conductivity...

Requires a HYDROS System to operate With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use the HYDROS Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a...

The HYDROS Launch is a multifaceted aquatic support system that combines various features into a single controller. It's an all-in-one solution that allows you to manage a wide range of aquarium functions easily. The HYDROS Launch...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Requires a HYDROS System to operate The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. The way it works is easy: just place the sensor inside...

Probably the most popular sized level sensor this is the ideal sensor for your average containers used in and around aquarium.  This will be the ideal sensor for measuring the return pump section of your sump.   You will be able to make...

This 9ft long extension cable for HYDROS Drive Accessories for Control 2 and Control 4.

This is a power supply for the Neptune Systems FMM, DOS, ATK and Trident.

This package includes: 1x - Apex DOS QD Dosing Pump 1x - Apex DDR Dosing Reservoir 2x - Apex 4 Meter DOS Tubing A multi-purpose dosing and fluid delivery system of uncompromising quality combined with the simplicity of Apex Fusion...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

This 9ft long extension cable for HYDROS Sense Accessories for Control 2 and Control 4.

Direct Pump Driver - For Reef Octopus Varios / Pulse WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Connect external switches and I/O Inputs to your Apex When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might...

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly.  There are...

3 Water Level Sensors for Added Redundancy Requires a HYDROS System to operate The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a...

A redesigned display module has been created with a slick new look that matches the color scheme. Orange LED

Bring the award-winning pumps and lights from EcoTech Marine and AquaIllumination wirelessly under the control of the easy to use, yet powerful, Neptune Systems’ Apex and Apex Fusion interface. Scheduled Feeding With the Apex, you can...

Some of the most successful reef aquariums employ the use of a macroalgae-filled growth area or refugium for the purpose of nutrient control. The GRO is a specialized, 20W LED light designed to grow many types of common macroalgaes (i.e. Chaetomorpha)...

The seneye+ disposable slide adds pH and NH3 monitoring to your seneye along with alerts and graphs for these dangerous pollutants. Each slide lasts 30 days. For use in conjunction with all seneye devices. Everyone should test their water to ensure...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

Plug this probe into your FMM and then place it on any surface where you want to detect stray water. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place.  Time is so critical when it...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...