Description
Characteristics
-
A dry blend which supplements existing biological filtration in established systems, providing a host of non-pathogenic, heterotrophic aerobic and anaerobic microorganisms (dominated by species which focus on remineralization of latent organic material).
-
Shifts Redfield Ratio.
-
Increases average ORP.
-
Outcompetes cyanobacteria for available nutrients.
-
Improves light penetration.
-
Enhances protein skimmer efficiency.
-
Reduces POM, DOM, and DIN.
Basic Application
-
1 g per 500 - 750 gallons (1,893 - 2,839 L) per week, or 1 g per 3,500 - 5,000 gallons (13,248 - 18,925 L) per day. Mix Remedi8 into system water, per instructions presented in 'Application' section, below.
Application
Keep out of reach of children and unauthorized persons. Avoid contact with skin, eyes, and mucous membranes. Store in a cool, dry location away from sunlight.
Remedi8 is a dry, free-flowing formula consisting of non-pathogenic, heterotrophic aerobic and anaerobic microorganisms, specifically selected for aggressive reduction of latent nutrients in recirculating systems. Reduced nutrient content is associated with: improved water clarity; improved growth rates; elevated ORP; reduced BOD, COD, DOM, POM, DIN, DON, PON. Regular application enables greater feeding frequency, improved nutrient management, and enhanced foam fractionation efficiency.
Maximum effectiveness is achieved within 12 months of manufacture date. This formulation does not incorporate preservatives, however refrigeration is not required. Unused contents of container should be protected from exposure to atmospheric moisture and other contaminants.
To inoculate: 1 g / 200 gal.; repeat once after 7 days. To expedite nitrogen cycle, apply in conjunction with aCtiv8, which provides necessary organic carbon and ensures rapid microbial colonization.
Maintenance: 1 g / 500 - 750 gal. weekly, or 1 g / 3,500 - 5,000 gal. daily. Monitor system nutrient balance. Adjust dosage accordingly
Recommended is to mix the required mass of Remedi8 to be dosed within 24 h with system water (the volume of water used need only be enough to form a fluid suspension; the precise volume is not important) in a clean vessel, and dispense the resulting suspension into an out-current water flow within the main body of the recirculating system. Avoid dispensing the suspension near drains and pump intake ports. If the suspension is to be kept ≥24 h, then refrigerate. Do not mix with low-TDS water (e.g. purified).
Depletion of available carbon, nitrogen, and phosphorus will negatively impact the growth of cohorts consisting in part or entirety of phototrophs; this includes plants, algae, zooxanthellate cnidarians, and poriferans hosting symbiotic zoochlorellae. Monitor nutrient concentrations and note apparent related impacts on cohort appearance and biomass. Adjust nutrient content in system as necessary to maintain desired cohort appearance and growth rates.
Disclaimer
Notice: It is not possible to eliminate all risks associated with the use, handling, or storage of this product. Ineffectiveness, injury to crops and/or livestock, or other unintended consequences may result due to factors outside the control of Captiv8 Aquaculture or the seller. Buyer or user shall assume all such risks. For details, go to Terms and Conditions. Consult SDS before use.
Disclaimer: Captiv8 Aquaculture warrants that this product conforms to the description, and is reasonably fit for the purposes described, on its label. In no event shall Captiv8 Aquaculture or the seller be held liable for any incidental, consequential, or special damages, loss, or injury, including, without limiting, lost profits, resulting from the use or handling of this product. The exclusive remedy of the buyer or user for all claims shall be the return of the purchase price of this product. Express and implied warranties are disclaimed. Captiv8 Aquaculture does not authorize any agent or representative to make any other warranty, guarantee, or representation concerning this product.
