Reverse Osmosis

Carbon Block Filter Cartridge - 0.5 Micron (nominal), 2.8" x 10" LengthFEATURES: Remove chlorine, organics, taste and odor Dual-purpose - combination sediment and carbon filter Excellent service life No channeling or bypassing of fluids Meet NSF...

SpectraPure MicroTec Sediment Filters are high efficiency depth gradient density filter cartridges with almost absolute micron ratings. They are strongly recommended for areas with extremely high sediment levels like NY, WA, ND, NC and IL etc. The...

SpectraSelect Plus™ membranes set the industry standards for highest rejection, flow rate, and longevity. SpectraSelect Plus™ 99% Rejection Membranes effectively DOUBLES post Deionizing cartridge...

SuperDI™ Color Indicating SilicaBuster™ Multi-Layer DI Cartridge - High-Capacity 10in Shell, 3in dia x 10in L FEATURES: SpectraPure® SilicaBuster™ Mixed-Bed Multi-Layer Deionization Cartridges are fabricated with semiconductor...

Replacement Filter Kit Includes: Spectrapure High Capacity Silica Buster DI Filter Cartridge 10"  Spectrapure High Capacity Maxcap Super DI Filter Cartridge 10"  Spectrapure RODI Carbon Filter 0.5 Micron Standard Spectrapure RODI Sediment...

Coconut carbon blocks are manufactured with a high purity Coconut Shell Activated Carbon.  With a high chlorine reduction, great dirt-holding capacity, and greatly reduced carbon fines.  Great performance in reducing sediments, color, SOCs...

Sediment Filter Cartridge -  2.5 in dia x 10 in L. Economical light weight filters for standard 10" housings reduces fine sediment, sand, silt, rust and scale. Polypropylene Sediment, 4 layer structure nominal micron rating. Certified by NSF 42 and...

Kit Includes: Stage 1 - Generic PureT 10" 0.5 Micron Sediment Filter Stage 2 - Generic PureT 10" 0.5 Micron Coconut Carbon Block Last Stage - 1L Bag Aquatic Life RODI Bulk Color Changing Resin Specifics: 1. Generic PureT 10" 0.5 Micron Sediment...

Prevent floods by adding the super-easy-to-install Flood Guardian to your RO or RO/DI System. Never worry about forgetting to turn off your RO/DI system or overfilling your reservoir again! Simply mount the magnetically-mounted sensor to any...

SpectraPure Standard 90-GPD Batch-Tested TFC RO Membrane, 2in dia x 12in LFEATURES: - Minimum Rejection = 96%. Stabilized Salt Rejection: 98%. - The membranes produce the rated GPD ± 20% at 60 psi. (Permeate flow and salt rejection based on the...

Lewatit NM-65 is a premium grade, gel type, high capacity, color indication mixed ion exchange resin prepared with a 1:1 chemically equivalent ratio of cation to anion resin. Lewatit NM-65 is a mixture of gel type cation exchange resin and a standard...

SuperDI™ MaxCap® DI Cartridge (Non-Indicating) - High Capacity 10in Shell, 3in dia x 10in L FEATURES: SpectraPure’s MAXCAP® DI™ Replacement Cartridge are the Heart of the MAXCAP® Series of Products. When placed ahead of...

Carbon Block Filter Cartridge - 1.0 Micron (nominal), 2.8" x 10" LengthFEATURES: Remove chlorine, organics, taste and odor Dual-purpose - combination sediment and carbon filter Excellent service life No channeling or bypassing of fluids Meet NSF...

Eshopps’ Float Valve offers a simple solution to help maintain proper water level.Use the Eshopps’ Float Valve as part of an automatic top-off system you create to replenish aquarium water lost through evaporation. Adjustable acrylic mounting...

Premium Blend Mix-Bed DI Resin - Made in the USA (Most are not)      Features Virgin Resin (not recycled, some cheap competitors versions are)  Color-Indicating - changes from dark blue to Orange/Rust Red  Made in the...

Color-Indicating SilicaBuster™ Multi-Layer DI Cartridge - Standard 10in Twist-Top Shell, 2.8in dia x 10in L FEATURES: SpectraPure® SilicaBuster™ Mixed-Bed Multi-Layer Deionization Cartridges are fabricated with semiconductor grade resins...

The Classic RO systems make up to 100 GPD of economically filtered Reverse Osmosis water, removing harmful substances like heavy metal ions and total dissolved solids from tap water. Features: Manual flush valve allows user to increase membrane...

SilicaBuster™ Multi-Layer DI Cartridge - Standard 10in Twist-Top Shell, 2.8in dia x 10in L FEATURES: SpectraPure® SilicaBuster™ Mixed-Bed Multi-Layer Deionization Cartridges are fabricated with semiconductor grade resins for highest...

STAGE 1 – TWIST-IN SEDIMENT FILTER CARTRIDGE. Aquatic Life Twist-In Sediment Filter Cartridge: Recommend replacing every 6 months. 5-Micron Sediment Filter that traps sediment and other particulate matter like dirt, silt and rust which will affect...

Color Changing Mixed Bed DI Resin Media Stage 4 - DI Media DI filter is the last stage of water filtration for the Smart RODI reverse osmosis systems and is necessary to reduce Total Dissolved Solids (TDS) to zero.  Filling a DI...

The DM-1 is consumer friendly monitor measuring feed (input) water vs. product (output) water of a water filtration system at any time. This device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in variety of...

SuperDI™ Color Indicating Mixed Bed DI Cartridge - High-Capacity 10in Shell, 3in dia x 10in L FEATURES: SpectraPure® Color Indicating Mixed-Bed Resin Cartridges provide ultra-pure deionized water and are tested to 18 meg ohm purity. - 33%...

Interchangeable with Spectrapure, Captive Purity's, Kent Marine's, AWI's, BRS's, and most residential/aquarium RO or RO/DI systems and SpectraPure® Eliminator Systems. - Remove chlorine, organics, taste and odor- Dual-purpose - combination sediment...

Sediment Filter Cartridge -  2.5 in dia x 10 in L.Sediment Filters are high efficiency depth gradient density filter cartridges with almost absolute micron ratings.They are strongly recommended for areas with extremely high sediment levels like NY,...

SpectraPure® ZetaZorb® Sediment Pre-Filter Cartridge – 0.2 Micron (Absolute), 2.8 inch Dia x 10 inch L for the worst sediment challenged areas! The unique technology employed in the construction of the SpectraPure® ZetaZorb®...

Our Nuclear Grade Color Changing Mixed Bed Resin physically changes colors as it becomes exhausted, allowing you to monitor the consumption of the DI resin and know when to change it out. If you use a TDS meter on your RO/RODI system we still recommend...

SpectraPure MicroTec Sediment Filters are high efficiency depth gradient density filter cartridges with almost absolute micron ratings. They are strongly recommended for areas with extremely high sediment levels like NY, WA, ND, NC and IL etc. The...

The new Enduro™ DI is the latest addition to SpectraPure’s line of high performance and specialty DI cartridges. With a longer lifespan than the legacy mixed-bed or SilicaBuster™ DI cartridges, the Enduro™ DI spends more time...

Kit Includes: Stage 1 - Generic PureT 10" 0.5 Micron Sediment Filter Stage 2 - Generic PureT 10" 0.5 Micron Coconut Carbon Block Specifics: 1. Generic PureT 10" 0.5 Micron Sediment Filter Economical light weight filters for standard 10" housings...

The Aquatic Life Twist-In 100 GPD 3-Stage Reverse Osmosis (RO) and 4-Stage Reverse Osmosis Deionization (RODI) filtration systems are very compact water purification solutions that efficiently combine reverse osmosis RO and DI technology with our...

STAGE 4 – TWIST-IN MIXED BED COLOR CHANGING RESIN DEIONIZATION CARTRIDGE. Aquatic Life Twist-In Color Changing Dual Deionization Filter Cartridge: Replace when the resin color changes completely. After the water is filtered by a membrane (not...

Add-on Booster Pump Kit for all 60, 90 and 180 GPD RODI SYSTEMS The Aquatec Booster pump has 3/8" ports and it comes with 3/8" to 1/4" stem's to reduce the size to standard 1/4 RO tubing. Includes Pump, Fittings, 3 ft Controller Cable, Pressure...

STAGE 2 – TWIST-IN CARBON BLOCK FILTER CARTRIDGE. Aquatic Life Twist-In Carbon Block Filter Cartridge: Recommend replacing every 6 months. Reduces chlorine and conditions water prior to an RO membrane. Working Pressure: Minimum 35 PSI, Maximum 80...

Our Nuclear Grade Color Changing Mixed Bed Resin physically changes colors as it becomes exhausted, allowing you to monitor the consumption of the DI resin and know when to change it out. If you use a TDS meter on your RO/RODI system we still recommend...

The Mega MaxCap® DI Cartridge is SpectraPure’s newest addition to the MaxCap® DI series of specialty deionization cartridges. Like the legacy MaxCap® cartridges, the new Mega MaxCap® functions as a roughing DI stage by removing the...

FilmTec™ Tap Water Reverse Osmosis Elements feature advanced membrane technology and offer outstanding reliability and consistency. Our automated fabrication process allows precise production of every element to tight, pre-defined specifications,...

Standard replacement RODI filter holder for RO Systems.  Perfect for replacing cracked filter holders due to freezing, etc. Replacement housing for RO system Standard size for all RO systems using 10" filters 1/4" threaded in and out...

Reverse osmosis (RO) units use the worlds most efficient RO membrane material to achieve a 98.6% rejection of TDS from your incoming tap water, but we can't stop there. The issue is that we need a full 100% removal of TDS for our reef or salt...

Ideal replacement for DI Resin, Carbon, and other media used for the water purification process. Fits standard 10" cartridge housing - Designed for upflow applications to ensure the longest possible exposure time. Twist-On Cap with Sponge to prevent...

Lewatit NM-65 is a premium grade, gel type, high capacity, color indication mixed ion exchange resin prepared with a 1:1 chemically equivalent ratio of cation to anion resin. Lewatit NM-65 is a mixture of gel type cation exchange resin and a standard...