20% Off Hanna Instruments

Nitrification is the biological oxidation of ammonia (ammonium ion) into nitrite followed by the oxidation of the nitrites to nitrates. The first step of this 2-step process is carried out in an aquarium by nitrifying bacteria. During this quick process,...

HI784-25 Marine Ammonia Checker HC (Handheld Colorimeter) Reagents are high-quality reagents for use with the HI784 Marine Ammonia (ppm) Checker HC. Reagents are clearly marked with the lot number and expiration date on each packet for traceability...

The HI780-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Marine pH Checker® HC. These reagents follow the Phenol Red method in which the reagents produce a range of...

The HI784 Marine Ammonia Checker HC is a handheld colorimeter that uses the Beer-Lambert principle to determine the concentration of ammonia colorimetrically. The HI784 is designed specifically to measure ammonia levels in a saltwater aquarium. The 0.00...

HI70007P is a premium quality pH 7.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

The Checktemp® 1 Digital Thermometer - HI98509 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products...

The HI1271 is the replacement pH electrode for the HI98100, HI98103, and HI98115 Checker pH meters. The HI1271 is a single junction pH electrode that has a slim 8 mm polypropylene body that easily fits into test tube and other small sized vessels...

The Marine Alkalinity (dKH) Checker® HC Calibration Check Set - HI772-11 provides a simple solution to validating the Marine Alkalinity Checker® HC - HI772 that has a range of 0.0 to 20.0 dKH. This high-quality set of standards is...

772 CheckerThe HI772 Checker®HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure alkalinity in degrees of calcium hardness, commonly abbreviated as dKH. Critical to marine environments, alkalinity not only provides...

HI7007 is a premium quality pH 7.01 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a...

The HI781-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their HI781 Marine Nitrate Low Range Colorimeter. These reagents follow a colorimetric method in which the reaction between...

772 Checker - Alkalinity in dKHThe HI772 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure alkalinity in degrees of calcium hardness, commonly abbreviated as dKH. Critical to marine environments,...

The HI98108 pHep+® pH tester provides high accuracy measurements in a rugged pocket-sized design. This ph tester features an exposed temperature sensor for automatic temperature compensated readings. The simple, two-button operation and large...

Deionized water for your research needs. Air-tight seal to ensure the quality of the solution. Marked with lot number and expiration date.

The glass cuvette is an important component of the optical system in all colorimetric and turbidimetric measurements. Light reaches the sample by first passing through the cuvette glass. Based on the sample, the light is absorbed, transmitted, or...

HI70010P is a premium quality pH 10.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers...

The Phosphate Ultra Low Range Checker® HC Calibration Check Set provides a simple solution to validating the Phosphate Ultra Low Range Checker® HC - HI774 that has a range of 0.00 to 0.90 pp as phosphate. This high-quality set of standards is...

Spare tester electrode. Compatible with: HI 98129, and HI 98130 Combo multi-parameter testers, HI 98127 and HI 98128 pHep testers, and HI 98121 ORP tester.  

The HI 98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation. The Checktemp® offers NO...

HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints...

HI7031L/C is a premium quality 1,413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution and supplied with a certificate of analysis. Hanna conductivity solutions have the lot number and expiration date...

The Hanna Ammonia Low Range Checker bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color...

772 CheckerThe HI772 Checker®HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure alkalinity in degrees of calcium hardness, commonly abbreviated as dKH. Critical to marine environments, alkalinity not only provides...

The Marine Nitrate High Range Checker® HC Calibration Check Set - HI782-11 provides a simple solution to validating the Marine Nitrate High Range Checker® HC - HI782. This high-quality set of standards is manufactured in our...

774 CheckerThe HI774 Ultra Low Range Phosphate Checker HC (Handheld Colorimeter) provides a simple, accurate and cost-effective way to measure phosphate in marine systems including reef tanks. Phosphate is an important parameter to measure in aquaculture...

HI70007P is a premium quality pH 7.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

HI70004P is a premium quality pH 4.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

The HI740271 is a replacement filter holder with Luer lock (1 pc.) for use with the HI781 Low Range Marine Nitrate Checker.

The Marine Calcium Checker® HC Calibration Check Set - HI758-11  provides a simple solution to validating the Marine Calcium Checker® HC - HI758 that has a range of 200 to 600 ppm calcium. This high-quality set of standards is...

The Hanna Free Chlorine Checker bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional...

The HI190M is a compact and lightweight magnetic stirrer. With a small footprint, lack of laboratory bench space is no longer a concern. Built to last with a protective covering and a user-adjustable stirring speed, this small stirrer is great for...

10 ml Syringe with Luer Lock used in Hanna HI781 Nitrate Checker

HI70004P is a premium quality pH 4.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

The Hanna Iron Checker bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional...

ONE Single 20 mL pack HI50021P is a premium quality calibration check solution used exclusively for the HI9813-6 portable pH/EC/TDS/Temp. meter. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring...

The Phosphorus Ultra Low Range Checker® HC Calibration Check Set provides a simple solution to validating the Phosphorus Ultra Low Range Checker® HC - HI736 that has a range of 0 to 200 ppb as phosphorus. This high-quality set of standards is...

HI740228 is a filter disc; part of accessory kit for preparation of samples to be analyzed with the HI781 Hanna Nitrate Checker photometers.

The Marine Alkalinity Checker® HC Calibration Check Set - HI755-11 provides a simple solution to validating the Marine Alkalinity Checker® HC - HI755 that has a range of 0 to 300 ppm CaCO3. This high-quality set of standards is...

The HI731339P is a volumetric pipette designed to measure and transfer exactly 100 µL of solution to a cuvette. To obtain the highest accuracy and precision from the HI758 marine calcium Checker it is necessary to add exactly 100 µL of...

The HI96822 is a rugged, portable digital refractometer designed for the measurement of salinity of natural or artificial seawater. The HI96822 displays results in three popular measurement units: Practical Salinity Units (PSU), salinity in parts per...